Champion Radio Products: Your source for Trylon radio towers, tower safety equipment, rigging gear, antenna reports, and more.

Make a selection here -- or use the text links below

Rigging Gear

Tower Tech Tool Buckets: These custom buckets are lightweight and strong. They're made out of canvas, have a plastic bottom and polypropylene handle.

Tower Tech Tool Bag

How many times have you been working on a tower and didn't have the tool or part that you needed? You'll have that problem no more with these handy tool bags. Made out of canvas, they have snaps that allow them to be attached to virtually any safety belt. Use one on the left for tools and one on the right for parts - these tool bags will save you time and frustration. $18.00

QUANTITY TO ORDER:

Heavy Duty Tower*Jack & Leg*Aligner Combo

New Heavy Duty Tower*Jack & Leg*Aligner Combo. This is the famous Tower*Jack PLUS the Leg*Aliner in ONE tool. You'll wonder how you ever got along without this valuable tool. This enables you to jack apart sections during dismantling or pull sections together during assembly. In addition, the LegAligner part of it is designed to help you align tower legs that just won't come together. Both tools are designed to be used with Rohn 20G, 25G, 45G and 55G. $107.50.

QUANTITY TO ORDER:

Tower*Block

This attaches to your tower leg and gives you a snatch block at the bottom of your tower that takes your vertical pull haul or ginpole rope and lets you pull it horizontally for safer and easier operation. It is designed to be used with Rohn 20G, 25G, 45G and 55G. Will take rope up to 3/4 inch. For more information about the Tower*Block, see this Oct 1999 QST Article (in PDF Format). $69.50

QUANTITY TO ORDER:

TJ Safety Strap

It attaches to your Tower*Jack or Leg*Aliner and lets you clip it to your climbing belt or haul rope for ease and safety. $14.95

QUANTITY TO ORDER:

Tower Pulley

This is the best pulley I've ever used and is always the first one up the tower. It's made from high impact plastic so it's pretty lightweight. The top hinges open so you can put it on it the middle of your rope haul line. It has a forged swivel eye and has a 1,000 pound safe working load. $90.00

QUANTITY TO ORDER:

Klein Cable Grip

This is THE EHS guy wire-puller. It is one of the famous Klein Chicago grips that is used by tower builders and utility companies. It will take wire from 1/8" to 3/8" Item 1613-40 - $130.00

QUANTITY TO ORDER:

Carabiners

These are the tower worker's best friend. A lightweight aluminum snaplink, they'll attach to anything - your haul rope, tower brace, etc. and are faster and easier to use than any other method such as a shackle. They are rated at 21 kN (4725 pounds) and are anodized. THESE ARE FOR LOADS ONLY AND NOT TO BE USED FOR MAN PROTECTION. $8.00

QUANTITY TO ORDER:

Lightweight Slings

Used along with carabiners, these very handy lightweight but strong one-inch wide sewn nylon endless straps can be used for rigging loads such as antenna slings, a choker to haul masts up a tower or MANY other tasks. 300 pound safe working load.

: 2 foot loop - $9.75; QUANTITY TO ORDER:; 4 foot loop - $11.00; QUANTITY TO ORDER:

Loos Guy Wire Tensioners

95% of hams don't know what their guy wire tension is. This is the cheapest and simplest way to tension guy wires. Never wonder about your guy wire tension again!

: Professional Model PT-1 -- Measures 3/32 to 5/32 inch cables. $76.00; QUANTITY TO ORDER:; Professional Model PT-2 - Attaches directly to the guy wire while you're adjusting the tension. Measures 3/16 to 1/4 inch cables. $79.00; QUANTITY TO ORDER:; Professional Model PT-3 - This new product measures bigger wire, 1/4", 9/32", 5/16", and 3/8". It's spring loaded so that it stays on the guy wire while you're adjusting it. $172.00; QUANTITY TO ORDER: