Adjustable Webbing Positioning Lanyard, 3-6ft

This 6 ft. lanyard has a special design that softens the shock of a fall. Double locking snap hook on one end and rebar/gorilla hook that will attach to just about any tower member (i.e. angle iron) on the other.  $86.00

These are the tower worker's best friend. A lightweight aluminum snaplink, they'll attach to anything - your haul rope, tower brace, etc. and are faster and easier to use than any other method such as a shackle. LOADS ONLY, NOT FOR MAN PROTECTION. $8.00

This is the full rig, the whole nine yards of safety harness. It has the Class 3 fall arrest harness, D-rings for positioning/work lanyard and has tongue buckle belt. With tongue buckle and seat. Sizes from Small to XX-Large.  $90.00

Used along with carabiners, these very handy lightweight but strong one-inch wide sewn nylon endless straps can be used for rigging loads such as antenna slings, a choker to haul masts up a tower or MANY other tasks. 300 pound safe working load.  $9.75

4 foot long Rope Lanyard. Excellent length for working lanyard on climbing belt, just right for Rohn 25G and 45G. 1/2-inch X 3-strand nylon rope with double action snaps at both ends.  $39.00